ROCBON 1000 series is a selection
of high-performance, reinforced fluorocarbon resin grades,
unique in the plastic family.
- Mechanical strength
- Solid cylinders up to 20 inch diameter
- Solid plate up to 48 inches x 48
inches x 2 inches
- Larger sizes are available upon
Technical support is available to help
select the proper grade for your application, and engineering
services can be provided for designing the finished product.
Grades and Applications
Virgin PTFE for packing, seals, and bushings
25% fiberglass-filled grade for common seals and bushings
|1911 and 1921
Carbon/graphite-filled grades for bearings, piston rings,
rider rings and various seals. An excellent combination
that provides good service life. 1911 has 25% fill;
1921 has 35% fill.
50% stainless steel-filled grade for bearings and valve
seat applications where high load and corrosion are
the main concerns.
55% bronze/5% moly filled filled grade for bearing and
seal applications where high load strength is needed.
Ceramic-filled grade (25% mica) for applications where
high wear resistance is required.
35% carbon fiber-filled grade where high strength and
high wear performance is required: a high-performance
Click the link below for a printable PDF file that summarizes
the key physical properties of the PTFE composites listed
PTFE Composite Properties.pdf